Aquest
any vaig proposar-me començar a penjar tutorials al blog. La idea era fer un
tutorial al mes, però ja vaig tard (com sempre)!! Però aquí teniu el primer
tutorial, per a que pugueu fer una manta ràpida, súper suau i original,
perfecta per a recent nascuts. Comencem? :)
This year I
propose myself the goal to post tutorials on the blog. The original idea was to
post a tutorial every month, but as you can see I’m late (as always!!) But here
you have the first tutorial, ready to make a quick and super cozy blanket for newborn
babies. Ready? :)
Primer
de tot necessitareu els següents materials:
- 95 x 60 cm
de tela amb estampat xulo / 38” x 26” of a lovely printed fabric
- Aproximadament
10 x 25 cm de tela per aplicar el nom + fliselina de doble cara adhesiva
de la mateixa mida / Aprox. 4” x 10” of fabric to appliqué the name + double
stick fusible web of the same size
- 4 tires de 10 cm per l’ample de la tela (en teles
de 150 cm d’ample) o 6 tires de 10 cm (si la tela és de 110 cm) per a fer els
bordes / 4 strips of 4” x width of fabric (for fabrics of 60” width) or 6
stripes of 4” (for fabrics of 44” width) for the borders of the blanket
- 110 x 80 cm
de tela “minky” o polar / 44” x 32” of minky or fleece fabric
La
gràcia d’aquesta manta està a les vores, les cantonades de les quals s’uneixen fent
biaix en 45 graus. No sé si en català o castellà hi ha algun nom per parlar d’aquest
estil de vores, però en anglès es diuen “mitered borders”. Per tal de poder
tallar la tela d’aquestes vores a la mida correcte, s’ha d’aplicar la següent
fórmula (per cada una de les mides de les vores):
Llargada del costat de la manta + 2 cops l’amplada de la vora
utilitzada + 15 cm
-------------------------------------------------------------------------------
I tindrem la llargada total que ha de fer la nostra vora
En
el cas d’aquesta manta, que tenim un costat que fa 95 cm i l’altre 60 cm i una
amplada de vores de 10 cm, haurem de tallar les següents vores:
- Pels costats de 95 cm à95 + 20 + 15 = 130 cm
- Pels costats de 60 à 60 + 20 + 15 =
95 cm
Per
tant haurem de tallar dues vores de 10 x 130 cm i dues de 10 x 95 cm. Si feu
servir teles americanes, que fan menys de 150 cm d’ample, necessitareu tallar
dues tires de 10 cm per l’ample de la tela (normalment 110 cm) i unir-les.
The nice thing of this blanket are the mitered borders, which are borders where the corners meet in a 45 degree angle. In order to cut your borders at the right size, you’ll need to use this easy formula (for each length of your borders):
Length of your blanket side + twice the width of your borders + 6”
-------------------------------------------------------------------------------
And you’ll have the total length of your border
For this blanket,
in which we have sides of 38” and 24” and a borders width of 4”, we’re going to
have to cut these borders:
- For 38” sides à 38 + 8 + 6 = 52”
- For 24” sides à 24 + 8 + 6 =38”
Therefore we’re
going to cut two borders of 4” x 52” and two more of 4” x 38”. If you use
fabrics of less than 52” width you are going to have to cut two strips of 4”
for the width of the fabric and sew them together to make a border of 52”.
Per
començar, doblega la tela estampada per la meitat, marcant amb una agulla els
centres de cada un dels costats. Fes el mateix amb les vores. Ara uneix centre
amb centre de cadascun dels costats i les seves vores. Aguanta-ho bé amb
agulles i cus-los, començant i acabant a 0.5 cm de l’inici i el final de la
tela estampada, tal i com es veu a la imatge. No t’oblidis d’atacar al inici i
al final de la costura! Repeteix aquest pas per a cada una de les quatre vores.
To start fold both
the border and the blanket top in half, marking their centers. Line the centers
up and pin them together. Sew the border to the blanket top, starting and
stopping 1/4″ away from the edge of the quilt top, as you can see in the photo
below. Don’t forget to backstitch at each end and beginning! Repeat with all
four borders.
Doblega
el top de la manta, encarant la cara externa de la roba estampada i formant un
angle de 45 graus entre la diagonal doblegada i la vora, tal i com es veu a la fotografia.
Assegura’t que les dues vores coincideixen i queden ben alineades. Amb un regle
i un marcador de tela marca la línia recte de 45 graus que segueix de la banda
doblegada fins al final de la vora. Subjecta-ho bé amb agulles.
Fold the quilt top
in half diagonally with right sides facing each other, creating an angle of 45
degree between the folded blanket top and the border, like in the picture.
Carefully line up these borders, and then grab a fabric marker and a ruler.
Place the ruler along the 45 degree angle and extend it over the borders. Pin
firmly place.
Cus
per sobre la línia que has dibuixat, començant el repunt just a on havies parat
de cosir quan has unit la vora amb la tela estampada. Això farà que no et quedi
cap forat en el punt d’unió de les vores. Ataca a l’inici i al final. Dóna-li la
volta per comprovar que la unió ha quedat perfecte.
Sew towards the
end of the border following the marked line, starting just at the point where
you finish stitching the border and the blanket top. This will ensure you that
there won’t be any gaps or spaces. Backstitch at the beginning and at the end.
Turn it up and and make sure there are no gaps in the inner corner and that the
border lies flat.
Talla
la tela que sobra de la vora a 0.5 cm de la costura i planxa la costura oberta.
Repeteix aquests passos per fer les altres tres cantonades.
Trim the excess
border to 1/4″ and press seam. Repeat these steps with the other three corners.
En
aquest punt pots aplicar el nom del bebè a qui va adreçada la manta, i així la
faràs encara més única i personal :)
At this point you
can appliqué the name of the baby who’s this blanket for, making it even more
unique and personal :)
Per
acabar la manta només has d’encarar el top que has fet amb la tela “minky” o
polar. Cus tot el voltant, deixant una obertura en el mig d’un dels costats d’uns
15 cm. Dóna-li la volta a la manta a través del forat, traient totalment les
puntes de les cantonades. Planxa-la bé.
Place the blanket
top ride sides together with the minky or fleece fabric. Sew around the blanket,
leaving an opening of about 6”. Turn it out through this opening, ensuring that
the corners are completely out. Press it well.
Fes
un repunt al voltant de tota la manta, tancant així la obertura que havies
deixat. A mi personalment m’agrada fer un repunt a les cantonades.
Top stitch around
the edges of the blanket, closing the opening that you left. I personally like
to stitch also the mitered corners.
I
ja has acabat! Espero que t’hagi agradat el tutorial i et sigui molt útil :)
Fins la propera!
And you’re done! I
hope you’ve liked this tutorial and you’ll use it a lot :) See you around!
Però que xula t'ha quedat aquesta manta!!! moderna i mooolt calentona... moltes gràcies pel tutorial, ho has explicat molt bé i les fotos també són molt entenedores!!!
ResponEliminaLa tècnica de fer aquestes cantonades la vaig veure també als videos que tenen penjats al Youtube els de Fat Quarter Shop. El vídeo es diu: How to Miter Borders on a Quilt. Queden xulíssimes!!!
Una abraçada i ànims a fer tutorials que els expliques super bé!!
Moltes gràcies Txell pel teu comentari! A vegades penges coses sense saber si agradaran o s'entendran, així que tenir un feedback com aquest és fantàstic! :D
EliminaUna abraçada!
Molt clar (i català!), gràcies!
ResponEliminaÉs xulíssima!! Moltíssimes gràcies pel tutorial! Petons!
ResponEliminaThank you for the tutorial!
ResponEliminaThank you for the tutorial!
ResponEliminaGràcies pel Tutorial! espectacular!
ResponElimina